74HC137 is a 3-to-8 line decoder and demultiplexer with integrated latches at the three address inputs (An).Functionality: Decoder and Latch: The 74HC137 combines the 3-to-8 decoder function with a 3-bit storage latch. When the latch enable (LE) input is LOW,...

The 74HC253 is high-speed Si-gate CMOS devices that are pin-compatible with low-power Schottky TTL (LSTTL). These devices comply with JEDEC standard no. 7A.The 74HC253 feature two identical 4-input multiplexers with 3-state outputs, allowing the selection of two bits from four...

The 74HC258 is a high-speed CMOS Quad 2-Input Multiplexer IC designed for a wide range of digital logic applications. It is housed in a compact SOIC-16 surface-mount device (SMD) package, making it suitable for high-density circuit board layouts. Here’s a...

The 74HC280 is a high-speed CMOS 9-bit parity generator/checker designed by Philips. It is used to generate or check odd and even parity for data transmission systems. Housed in a compact SOIC-14 SMD package, this IC offers efficient data integrity...

The 74HC366/74HCT366 is high-speed Si-gate CMOS devices designed to be pin-compatible with Low-power Schottky TTL (LSTTL). These ICs function as hex inverting buffer/line drivers with 3-state outputs.Key Features: Inverting Outputs: The outputs of the device are inverted. 3-State Outputs: The...

The 74HC368 is a hex inverting buffer and line driver IC from Texas Instruments, designed for high-speed digital logic applications. It features six inverting buffers with high current drive capability, making it suitable for driving TTL and CMOS logic levels....

The 74HC4016 is a quad bilateral switch designed to control analog or digital signals. It operates as a multiplexer or demultiplexer, allowing for the routing of signals in various electronic applications. This IC is available in a compact SOIC-14 SMD...

The 74HC423 is a dual retriggerable monostable multivibrator IC from NXP, designed for precise timing applications. This IC features two independent monostable multivibrators that generate accurate pulse widths and timing intervals. Housed in a SOP-16 SMD package, it is suitable...

The MC1489 is a quad line receiver IC designed to interface with TTL and CMOS logic levels. This IC features four independent line receivers, making it suitable for use in data communication and signal conditioning applications. It is housed in...

The SP491 is a full-duplex RS-485 transceiver IC designed for reliable high-speed communication over long distances. It features low power consumption and enhanced noise immunity, making it suitable for industrial and commercial applications. The IC is available in a compact...

The MC34184 is a low power, high slew rate operational amplifier with a wide bandwidth and JFET input, manufactured by Motorola. This IC is designed for high-speed and precision applications where low power consumption and high performance are crucial. Housed...

The OP177 is an ultra-precision operational amplifier IC designed by Analog Devices (ADI). Known for its outstanding precision and stability, the OP177 offers extremely low input offset voltage and low drift over time and temperature. It provides superior DC performance...

The AM26LV32 is a low-voltage, high-speed quadruple differential line receiver IC from Texas Instruments, designed to complement differential line driver ICs such as the AM26LV31. It is used in high-speed data communication systems to receive differential signals and convert them...

The MT8816AP is an 8 x 16 analog switch array IC designed for use in telecommunications, signal routing, and audio switching applications. It provides 128 crosspoints, allowing any of the 8 inputs to be connected to any of the 16...

The ILX232D is a dual RS-232 transceiver IC designed for reliable serial communication between TTL/CMOS logic levels and RS-232 compliant devices. It includes two drivers and two receivers, enabling full-duplex communication. The IC operates on a single +5V supply and...

The SN74121N is a monostable Multi-vibrator with Schmitt-trigger inputs features dual negative-transition-triggered inputs and a single positive-transition-triggered input which can be used as an inhibit input. Complementary output pulses are provided. Pulse triggering occurs at a particular voltage level and...